Mittwoch, 24. April 2013

Engine for Saison 2013

This is the Street-Engine for my `56 Ragtop Oval for Saison 2013
 
Specification:
 
1915ccm
Stock Crankshaft modified
Lightened Stock connecting rods
94mm AA modified Pistons  & Cylinder
Ligthweigth Wrist Pin
W120 Camshaft
72g Lifters
Cylinderheads 041 JPS modified
40 / 35,5 Valve (Lightened)
Titanium Retainers
Single Hi-Rev Springs
1:1,25 Rockers
JPS HD Aluminium Pushrods (41 Gramm / pcs)
JPS 3,4kg Flywheel
40 Dellorto with JPS 34mm Venturi
1-2-3 Tune Ignition
CSP Super Competition Exhaust
 
Very nice engine revs up like a Super-Vee!
 
 

 
Long Block Assembly
 
 
GBE Case Conversion Kit
 

Sonntag, 14. April 2013

Technical Facts Formel Super Vee

Today's blog is for People the love the fine art of Formula Vee and Formula Super Vee.


For all guys the prefer "hard" stuff like K Motion K800 Dual Chevy springs, steel pushrods and monstervalves  they can stop reading here.......




I've found two tables to the engine technology of Formula Vee and Super Vee, which show the fine technique to build a "air"-cool engine .

Have a look on valvespring pressure, valve size and carburetor size and the performance per liter they achieve.

My 1915er streetengine  is built "almost" identical
I love the response of this engine ......

Try it yourself once , a wide grin is for sure

nice week
Pit



 

 
 

Donnerstag, 11. April 2013

Only for comparison

You don`t need a flow bench to see the difference!


Orig. Dellorto Venturi     vs           JPS Venturi


JPS Dellorto DRLA Venturi Shipset

A Set of JPS Dellorto DRLA Venturi in Ø34mm ready to ship


Thank you Thomas!

Have Fun and all the Best for your nice Streetscreamer Project

Sonntag, 7. April 2013

JPS Valvecover

JPS Valvecover with better lubrication and cooling  for the valvetrain and cylinderhead



This reduces wear on the rocker arm and ensures uniform cooling and lubrication on both sides of the cylinder heads

Donnerstag, 21. März 2013

JPS Venturis for Dellorto DRLA

I was unhappy with the shape and quality of the Dellorto DRLA Venturis
 so I began to produce my own Venturis

 



                                                        These are available in sizes:
                                                                         32mm
                                                                         34mm
                                                                         36mm

                                                     Price / Each    SFr 21.- / € 17.-


           These venturis are made ​​from high quality aluminum and fits perfectly


                                                    Manufactured in Swiss Quality




JPS Utimate Racing Pushrods ready to ship


  A nice Set of JPS Ultimate Racing Pushrods
!max. Valvespring pressure 280kg!

 ! now its finished with the annoying rattle from the valvetrain!
Made to custom lenght and assembled ready to use





Samstag, 16. März 2013

JPS Ultimate Racing Aluminium Pushrods

This is how the JPS Ultimate Racing Pushrods look like before installation of the Manton Tips

The Pushrods are tappered on both sites
Deephole drilled from one site!

There is no gap or edge in the middle

The JPS Ultimate Racing Pushrods are made of a special aluminium material.
This material is used in engine areas on aircraft where the temperature often encountered up to 250°F (120°C)

This material does not lose strength when the temperature rise up to 250°F (120°C)

 7075 T6 Aluminium will lose 3 times more in strengh when its getting 300°F (150°C)
And the pushrods get in contact with the oil that go up to the heads and with the hot oil coming back from the heads!


 JPS Ulimate Racing Pushrods are only available cut to your lenght.
 I will do the installation of the tips (special proceed and tools are required)
So you only must give me the lenght you need!

This pushrods can handle up to 280kg spring pressure (but no serious engineer need that much)







 
 
It was not easy to do this photo
But you can see, perfect clean hole no gap or edge

 
 


 
Line up




Sonntag, 10. März 2013

Camshaft Gear Modification

For my HP street-engines I modify the camshaft gear as you can see below


I cut two approx. 2,5mm width an deep to the ground grooves in the cam gear.
This is to reduce the surface that is in contact and the oil can squish out easier.


Or you can put some marking ink on the cam gear and find out how much surface you need.
You can reduce it by nearly 40%
For HP street engines there is no reason to run straigthcut cam gears
To you need some examples?

This is the camdrive on the Porsche 910 race engine

This on a Carrera 6 engine

and this on a 3.0l RSR engine


All this engines turn up to more than 8000 rpm, producing more than 110 hp/l

The camshaft gear on this engines must drive the huge oilpump, 2 duplex chains for the camshaft that serve 12 valves with double valvesprings.



So I think this are good arguments to throw the noisy straight cut gear in the trash ;-)


Dienstag, 5. März 2013

Black Magic ready to run

Nice Layout



Typ IV Head rework

Heads for 412 LE machining

 
 
assembled
 
 
 

Mittwoch, 27. Februar 2013

Head to Head

Meeting of the Superheads?



3 Nations
3 Concepts

Remmele Motorsport
RS-Motor
JPM Motorsport



Sonntag, 24. Februar 2013

Do you need a Br(e)ake

This delicious brake for the front axle is for sale!

It comes with new Pagid RS14 brake pads
and mounting screws and orig. brake pads

Disc dimension is 330x34mm
Monobloc calipers 996.351.430

No heat cracks or damage, like new


Make an offer!


 
 

Freitag, 22. Februar 2013

Pure Racing II

                                                     Big Boys Toys ready for racing!

 
 
RSR Style Slidevalve for Flat 6
 
 
 
Can you hear the engine scream?
 
 
 

Donnerstag, 14. Februar 2013

JPS World of Flywheels

               A new set of JPS Lightweigth Flywheels is manufactured

              Price for a JPS Flywheel : jpsaircooled@gmail.com
             
              Most customers want them unbalanced, they to balancing with crankshaft an pressure plate together   

                 If you want the Flywheel balanced it can be arranged                                  

 
 
                                                            World of JPS Flywheels
                                                       

 

 

Dienstag, 12. Februar 2013

JPS HD Aluminium Pushrods / Prices

 JSP HD Aluminium Pushrods ready for Installation

All Set are custom made for thr perfect fit, to your application!

This set is custom made to a total length of 270mm



 Set of :
8 pcs. HD Aluminium Pushrods  Ø10mm / Ø6mm  (265mm length)


This are precisions tubes (Made in Germany), not drilled from both sites!!

Weight as you see above, 45Gramms with Tips (from Manton Pushrod)

8 pcs. HD Aluminium Pushrods cut to custom length
16 pcs. High Quality Tips from Manton installed

max. length is approx. 284mm



You can handle a valve spring pressure up to 200kg easy!
Race proven and tested over Years .

Samstag, 9. Februar 2013

Pure Racing

                                                The JPS Slidevalve in on the engine


 
The engine is from "Wallä" Zwahlen`s racing car
 He is racing since 30 years!!!
Most on round track and hillclimbing
 
 
 
Perfect Intake Manifold Ø 49mm with Injector hole
 
 
 
Fits perfect! 
 In connection with Kugelfischer mech. Injection
 
We look forward for the Dyno results